Question about Televison & Video
...turn blue then TV come on but mine the red light dims then comes back bright red TV doesn't come on The power board is cooked. consider another tv.. Consider using surge protection in
Question about Philips Televison & Video
...protection active 5 = Signal Processor (IC 7150) register corrupted 6 = Signal Processor (IC 7150) error 7 = Total failure 8 = Internal RAM error (Microprocessor IC 7000) 10 = NV memory (IC7088) ...
...power button on the remote the red light blinks then goes off but there is no picture or sound? flashing power light: projection TV`s have many protective circuits in them, they protect your CRT`s ...
...power surge the mov (high voltage protection device ) will get short and blew fuse to protect further damages. Chekc is the mov in the input stage is short or not . MOV ...
power turned on red light flashes 6 times then stops blinking for 3 seconds and starts again over and over. TV never powers up Im afraid the set is probably in an over current protection mode wherebye
Question about Syntax Televison & Video
protection system keep activate, First you have to check power supply unit, Check it properly if you have service manual then first check fuse, if fuse is burnt then replace it and if not then proceed
...red light comes on. power button or only standby red light comes on. power button or the remote will not bring power light on. There is a failure on one of the circuit boards, and or the power supply ...
...power light goes from red to green then snaps back to red after about 10 seconds. There is no picture whatsoever, just a black screen! HELP!! Most likely the main power supply is defective. It could ...
...power on the tv, either with the remote or on the tv, the red led that normally turns to green when powered on, will only flash green for a split second, then back to red. The tv will not turn on at ...
Question about Televison & Video
...red light at power panel swift showing red. .I turned on click on rellay..like protect. .thanks I help to find schematics diag. If you wish to get some details; check the site linked here. Pull up ...
12 questions posted
Usually answered in minutes!
1,061 Questions
920 Questions
867 Questions
724 Questions
662 Questions