Philips 42FD9954 42 in. Plasma HDTV "phillips flat screen goes black" Questions

screen goes completely black. If I turn the TV off and than back on in 15 minutes the picture returns , for about another hour and once again goes black ? The lower "Y Buffer" board is defective. Best

Phillips-tv picture goes black still has Picture goes black still have sound- turn off and unplug wait a minute turn back on and picture comes back for a few minutes then goes black again Could be the

screen is full for about 30 min before going black again. Download software from the Phillips web site. Use a usb flashdrive to transfer the download to the TV. This worked well for us and our picture

...Phillips and when I turn it on the screen blinks for a split second the Phillips logo then it goes black.. Any idea which card could be replaced to repair this? I hear the set power up and stays on ...

Phillips flat screen plays and than makes a buzy noise and goes black Fault with main board. Damaged component/s at it. Contact any service technician; or the authorized service center. If you wish to

...Phillips 42in. plasma goes black; it's been getting longer, as time goes on. It's had two boards replaced already. Does anyone know which board controls the bottom half of the screen? ...

...just sound phillips 47 inch ambilight t.v perfect picture and sound but at times picture goes and leaves a black screen with sound can anybody help me thanks are you watching sky through a scart ...

...have a phillips tv 42pf7621d-10 sound is fine but picture only stays on for a second and then screen goes black, green on light stays on ? Inverter problems found out which one it is de master or ...

...screen for the model. We have a 42 inch Phillips plasma TV. It was working fine up until about an hour ago when all of a sudden in the middle of a program, the screen would go back to the model's set ...

phillips flat screen tv left half of screen is black right side is dim and flickering after doing factory reset turn off unplug hold power button screen works for about 1 min and then goes back to ...