Question about E-Machines Computers & Internet
...words/letters that go with the jumpers on the motherboard itself. look around the jumper settings area for power, pwr etc. and match them up with your jumpers which should have what the go to on
...jumper diagram for motherboard i have a dell 160 l i need the jumper diagram for the mother board lay out i nstaled new 80 gig and new xp pro and wont boot up Hi, Check that the hard drive is set to ...
...motherboard, look for a battery. you should be able to see either a button or a jumper switch. press the button or remove the jumper and startup the machine. In regards to the jumper, after removing ...
...motherboard plug into my sata hard drive and do I need a jumper on sata hard drive and what setting would the jumper go on A sata drive doesn't need jumpers. The jumpers were only required when 2 ...
...jumper is starting setup 5. i want to know the details of jumpers and motherboard settings 6. only harddisk is detecting 7. cd rom is not detecting 8. i want diagram of motherboard and manual ...
Question about E-Machines Computers & Internet
...jumper on the motherboard OR a setting in the motherboard bios. Try looking through the bios menus first... If there isn't a way to disable, get the model of the main board and look at the jumper ...
jumper. Scroll all the way down to the bottom there is a diagram of your motherboard: http://support.dell.com/support/edocs/systems/dim5100/en/sm/parts1.htm#wp1370145 Switch the jumper and then switch
...jumper plugs and pins on the motherboard, refer to the Manuals. Use the PSWD jumper, and put it on the RTCRST jumper for 5 seconds. Put the jumper back onto the PSWD pins. Plug the power cable into ...
Question about Gateway Computers & Internet
...motherboard. I did not change any pin/jumper settings. I lost my cheat-sheet diagram and need to determine which wires/cables go where... Look for a make and model number and version number on the ...
...jumper pins are usually on the left corner, if you are looking down on the motherboard with the front toward you. You may need a flashlight and /or a magnify glass to look at the pins. You Will see a ...
5,283 questions posted
Usually answered in minutes!
345 Questions
167 Questions
141 Questions
87 Questions