Philips VR550 VHS VCR "replacing fuse" Questions

no power to the vcr Probably not just a fuse but it is related to the power supply, which in newer VCRs is likely a switched mode supply but linear in older ones. Either one is a fairly cheap and easy

Last night when I went to use my VCR, I observed the display screen was dark. My VCR is a Zenith VCR Model VRM4170. I inspected the power input board and found the 1.6 amp, 250V fuse was open. I ...

I have a Sharp VC-H982 VCR. Went to turn on today and it is not getting any power. Worked fine last night. I have moved the power cord to a different receptical, still nothing. Is there a fuse that ...

unit dead after a power outage replaced fuse blew fuse again even with power out of unit can i just get a new power supply? Below is a link to a list of replacement parts for this unit. ...

No Power. Checked cord with voltmeter. It is good. Might be fuse. It might be the fuse. Try replacing it with the equivalent fuse. Also check the circuit board for faults. Good luck to you!

Goldstar GVR-E455 VCR can not be turned on I love this old VCR, but it stopped turning on. No power. I hoped to replace the fuse -- that would be easy. Can not find the fuse. Is there any somewhere? ...

replacing fuse did not turn it on that indicates that there is a problem in the power supply board of ur unit.check out for any bulged up capacitors initially.if u find any of them bulged then replace

Panasonic PV-4664 VR wont't power on. Replaced 1.6A input fuse and fuse blows immendiately when power supply is both installed and removed from the unit. Appears the power supply has a problem. ...

...type fuse and it's gone without something causing it to go then replacing it will solve the problem. However not all fuses are glass types. And the chances are that something caused the fuse to

Even though my M-635 was plugged into a surge protector, the electrician failed to check when installing a new breaker box thus burning out the unit. Is this a simple fix with perhaps an internal fuse