Philips Magnavox 9P6034C 60" Rear Projection Television "output stks" Questions

...when its locked. There are no Locks on Power set either comes on or it doesnt.No Power could be shorted hori output transistor/ small blue cap 2kv feeds to hori output may be bad or your STKs are

...output and capacitor in same section ( 100uf, 220uf,3300 uf and 2.2uf ), replace all. 3.- STKs ICs convergence , need be replace ( check any resistor around STKs, for burn or brown color). ----- Try ...

...turning off. The error code is 21. It is a VS-50609. Can you help? If you have STKs 392-110s 1 is shorted if so replace both upgrade with180s also check hori output transistor ans 1200pf 2k

...stay on and pouer Replace both of your STKs ICs they are big black ICs also behind hori output is a blue capacitor see if it is ok i have seen some that will have a burn hole on them 1200pf 2k volts

...output of the blue tube.It does not even move when I try to align it with the test pattern to produce the white line. Check for bad resistors low ohms near your STKs big black ics. my sound on my ...

...on the board I cant tell what voltage zener they are its a pioneer sd-p6093-k how about looking at the output resistors... also look at the fuses feeding the stks ussally if the blow the two fuses ...

...ic's and some open resistors. This is a common problem for projection tv's. Check: resistors RK42, RK46, RK50, RK54, RK58, RK62 Output STKs IK04, IK05. I hope this helps. Thanks for using

...for this your convegence output ics commonly called stks or and you convergence ouput resistors. not a difficult repair for most shops and aroud 250 for parts and labor the ic run about 45 ...

of life!" Can't find the manuals anyway, either. How do I get the set to turn on? Thanks SET will not turn back on untill you have it fixed,check out hori output ,shorted diode, or STKs need replacing

...STKs improperly. In my humble opinion I did some rather good soldering, so my hunch is that something else is broke. Thanks. If one your convergence IC's is bad then you will still see a picture but ...