Philips Magnavox 9P6034C 60" Rear Projection Television "changes red green blue" Questions

...red green blue with the white and red audio cables) it could very well be that the green cable (carries the green signal) is the problem. try changing the configuration (ex: use blue to carry the ...

...red.. what can i do as theres no convergence tool on my menu option prob. pix tubes or fluid needs changing take off screen and look into tubes while set is running see if pix is present in green and ...

...not defective before you replaced the green. remove the red =no change in the screen color, that could be bad. put back red, then remove blue=screen color changed, blue is good, hope you got the

...red,green,blue plugs may be mixed up because the green should stay and red & blue move ! hi i tryed this to but still have the same problem and now my auto focas says no sensor so can you please give ...

...Red, Green, Or Blue Depending On Which Crt Has Been Affected. During Turn Off A Crt Might Arc, Causing D304 (Red), D331 (Green) D361 (Blue) Damage And Leak Changing Cutoff Levels. Replace Diodes With ...

...blue, green, red lines dont align w/ pic dont have the remote and blue, green, red lines dont align with picture... what do i do? Convergence problem - a tech may decide to change the convergence ...

...red, blue and green. Adjust only the screen controls very carefully and slowly. I would recommend reducing the red slightly brfore raising the green and then blue until the picture looks acceptable. ...

...red light. The blue and green light is shining up through muddly cooling fluid and that is why the red is predominating. A reputable tv repair shop can pull the tube assemblies and dismantle them and ...

The green CRT coolant has congealed thats whats giving you the green halos. Change the coolant in the green and blue and your set will be fine. red is never affected so the red coolant should be fine