...TV draws. Thats why the sound changes with the picture. This could be an indication that a part is going to fail soon or it is just a loose coil winding or a transformer winding. You should have the ...
...TV on and have no picture only sound. Can change channels and the sound changes tried VCR for input and same result. there are no lines or anything on the screen it is just black. Hello All, I posted ...
...picture, no sound. Ur high voltage FBT,is dead the block of plastic with a red wire with a cap hook to the CRT(tv tube).Might also have to replace the whole power board?Because just couple parts it ...
...picture shows but do have sound model 51mp392h/17 it just black screen shows Hello cce357, This can be any number of things, here is a possible listing: 1) No High Voltage (check the IHVT or the ...
...picture. Hi.I have a 54 inch Phillips rear projection TV, about 5 years old.Turned it on and only have sound,no picture,just a black screen.It had been making a high pitched noise sometimes when it ...
...tv model lcxw 32 hd1 power panel amo1 2004/02 version 1 Hi. Providing the noise is not causing any picture or sound problems then the noise from the transformer is from the windings vibrating at A ...
...picture tubes develop an internal short and cause arcing. I world CAREFULLY disconnect all of the wires to the CRT and see if the arcing goes away. VERY IMPORTANT!!! there is a high voltage wire ...
...TV is on, it goes off by itself and makes siren noise. If you turn it on again, it goes off again. What seems to be the problem and how do you fix this? Peter Hello golfhoon72,That siren noise might ...
...TV STOP NO PICTURE OR SOUND i need m# if you don,t have eny power noled in front of tv a green lite ck out fuse if that good. ck hozoutput it by the flyback most of time if the hozout is bad you ...
41 questions posted
Usually answered in minutes!
1,061 Questions
920 Questions
867 Questions
724 Questions
662 Questions
