Philips 60PP9401 60" Rear Projection Television "hope set remote sanyo tv" Questions

...remote to make these adjustments. If you are unable to make these adjustments then typically it is because one or both of your TV's convergence chips are burnt and need to be replaced. You can ...

...set in AM (amplitude modulation) then try to push the button in front of the AM radio, if you push the button of the remote control in the front of radio AM you can hear a sounds beep beep beep every ...

...remote go-to the tv settings then goto the convergence section. Try to adjust the red and then the blue convergence. You should be able to move them up, down, left, and right. If you can't move them ...

...hope this helps. ok.. buy it from ...

...set up and turn the knobs. I hope you did not adjust the knobs without some instruction. It may be a convergence failure. ( common problem ) or cloudy CRT fluid. Here are some of the most common ...

...set send them a quick note and they will put one together foryou. Their kits include a photo instruction guide, original OEM Sanyo STK chips, convergence resistors, pico fuses, etc. I hope this will ...

set to a tv repair shop tech stated the convergence power supply board need replacing and this may not solve the problem!would cost 600.00 to replace the convergence supply board. caught in the middle

...set and see if red and blue are lit. Then I would turn Screen control up just a bit to see if red or blue comes back, remember if don't see the red or blue come up then turn back down, also focus is ...

...hope this helps, post more detail for more help from me. 50p8341a Your TV most likely has one of two possible problems. Problem #1: Convergence Chip Failure ( common problem ) Here are some of the ...

...remote go-to the tv settings then goto the convergence section. Try to adjust the red and then the blue convergence. You should be able to move them up, down, left, and right. If you can't move them ...