I PLUG MY SPEAKER WIRES INTO THE BACK PART OF THE TV, BUT FORGOT TO UNPLUG MY WIRE FROM THE RADIO AN TURN THE RADIO UP AN THE TV WENT OUT. NOW THE TV HAS NO SOUND AND IT KICKS ON AND OFF. TV REPAIR ...
wick to remove the old solder so the HV generator can be removed. Both of these are available from radio shack. also the solder that works best for printed circuits is radio shack part # 64-006 solder
Solder to use on ICs Is regular electrical solder ok to use when replacing ICs? no its best to use radio shack solder # 64-006 for electronic circuits.
...chip on my JVC AV-48wp74. how to take that chip out of there. Get the $10 desolder iron that radio shack sells. Just be careful not to burn the circuit
...can u help me nsw Pioneer Widescreen Rear Projection TV SD-T50W1 You can buy a universal remote in Radio Shack, Best Buys, Circuit City, etc. or any department or appliance store. A factory ...
...sinks with cooling fins. Very easy to locate. You need a solder remover with a sqeeze bulb on it ( Radio shack $14). This will allow you to remove the solder on the bottom of circuit board with out ...
...Today with "HD TV" get a good UHF/HD antenna. You can get at any local Best Buy, Circuit City, Radio Shack etc. Good Luck, big IRISH. PS: Inside or
RCA HDTV R52WH74YX61 blown fuse Hi I pulled the blow fuse and went to radio shack to try and replace it no luck The fuse says .6a/125v and P233 It has some symbol F. before the 6a not sure if this is
Question about Televison & Video
swollen. Sometimes they are not swollen but still can be bad. You can buy replacement capacitors at radio shack and de-solder the old ones off the circuit board, then carefully solder the new ones on
...radio operator for 40 years. I think i could fix it IF I knew what to replace. THANK YOU for your time and help with my problem Ernie If you have the answer you may e-mail me direct at ...
147 questions posted
Usually answered in minutes!
1,061 Questions
920 Questions
867 Questions
724 Questions
662 Questions