...phillips hdtv won't turn on and i can also hear like a churpping sound in the inside of the TV This problems,cause by the 2 STK dead convergence too.U must have soldering tools,solders and must Know ...
Question about Televison & Video
Phillips HDTV Projection TV. Screen around 43 to 50 inches. Turns on and works, but colors don't line up creating a shadow affect. Yellow and blues don't line up. Can we fix this for a reasonable cost
...the ICs fail on a phillips. You can get the convergence repair kit for your phillips from www.tvrepairworld.com which contains the ICs, resistors heat sink paste and the CD with repair
and possibly the 6.8 ohm resistors. The Phillips DPTV305 - DPTV335 convergence repair kit available from www.tvrepairworld.com has the two ICs and the 12 resistors plus the CD with repair instructions
...Phillips 60PP9202 60in. rear projectiov HDTV, but the red and blue colors are outlining the faces you need to replace the convergence ic's you can get a convergence kit from. ...
convergence off I have a phillips 51pw9303/17f and i cannot adjust the convergence it is off and remote wont adjust it? I went to menu and went to convergence and it just wont change it? The ...
...Phillips 60PP9202, I have replaced the convergence ic's. It is chirping when powered on. There is a thin white cable on the same board as the convergence ic's that is crimped. It plugs into slot 1340 ...
phillips 43in hdtv blue and red lines across the screen tried to aligne but didnt help any ideas wat i can do This sounds like convergence output IC problem. convergence board would have to be removed
...convergence will not line up on my phillips projection tv how can i fix it? The convergence chips are toast. This is a common problem. Goto the site www.TvRepairKits.com to get a repair kit with ...
...step by step instructions with pictures on how to do the repair. ...
102 questions posted
Usually answered in minutes!
1,061 Questions
920 Questions
867 Questions
724 Questions
662 Questions