...yoke) of the CRT tube. There is one coil that controls the horizontal sweep and another for the horizontal. As the electrons stream from the guns (or emitters) in the neck of the tube, they pass ...
...CRT yoke is damage the magnetic field out of wack,can not,do anything to it. Due to a variety of causes, TV crt's can develop unevenly distributed magnetic fields on the face. These variations will ...
...CRT phosphors, immediately turn down the brightness so the line is just barely visible. If the user controls do not have enough range, you will have to locate and adjust the master brightness or ...
...yoke, but check the the loads first. Wait a few minutes for the filter caps to discharge (but stay away from the CRT HV connector as it may retain a dangerous and painful charge for a long time), use ...
...yoke or old dried heat sink compound. If the HOT is ok then there is probably a short in another component. This can be determined in most cases by isolating each module one at a time. In other words ...
...CRT type TV, there will be deflection yokes for the tube(s), and there will be induction coils used in the scan amplifiers. As the coils age, their internal windings, especially on the outer layers ...
yoke coils.Could also be a bad blue CRT. Look at IC901, STK392-110 and releated components in the circuit, page 97 of service manual.Look at the Blue CRT DRIVEASSY (AWZ6603Download Service Manual here
71 questions posted
Usually answered in minutes!
1,061 Questions
920 Questions
867 Questions
724 Questions
662 Questions