Philips Magnavox 51MP392H Rear Projection Television "sound receiver" Questions

...sound in receiver/ amplifier speakers. This is a test/ check and you can use it to get TV sound through receiver speakers. And if still no sound in audio out jacks in TV then TV needs main board ...

...receiver but not sound from TV when I disconnect the receiver Make sure you have audio cables running from the box (or other device) to the TV bypassing the receiver.If that's hooked up correctly you ...

... Plug the L and R audio outs into the L and R audio inputs on your receiver. Then make sure that the internal settings on the TV are set to 'Surround Sound.' Michael Lazar ...

sound from the cable box and receiver using radio speakers Most Cable Boxes have a audio out out via RCA connections. You should be able to run a Audio Cable from them to the AUX input of you receiver

...sound. I have a old kenwood receiver, but the tv only has inputs for audio, output for spdif. Does that mean I have to get a receiver that has a spdif in/output so I can hook up my surround sound? If ...

receiver to TV with an HDMI cable and select the input of the TV to HDMI. Then the TV will receive the HDMI signals from the amp. The amp should be connected with external antenna or cable connection.

...up surround sound Can you clarify? Are you talking about just an amp, or an a/v receiver? In short, the answer is yes, but some amps/receivers have limitations on what inputs/outputs are

...receiver to my Hitachi TV HDMI input. The TV gets sound and picture from the satellite but when I try the blu ray the tv will not give me picture or sound. I get a black to hot pink flshing screen ...

...sound is ok with a DVD etc connected via a rear input (connect directly to set and not thru a receiver etc) the problem is not the set.If using a box unplug it and or a receiver for a while and plug ...

...sound from music channels. I checked my other tv and everything is functioning fine from satellite. Any ideas? If you still can see the DirecTV guide and menu, the problem could be on your satellite ...