Sanyo DS13204 TV "change video feature" Questions

...problem. I used autoprogrtam feature of my cable remote to use the TV part of the that remote. With that remote I was then able to change video inputs and access all the menus properly. Good luck, ...

...change tv input to tv video 3. Unfortunately, you do need a remote with a TV/Video Input/Source button. ...

...till you get 1 or 0. After 1 or 0 again press program (-) button you get video mode. Or try any other option in menu features to change video mode. I hope the above information is helpful to

...change the video output setting to S-video on my JVC AV32820, but I can't find that on the tv menu. The only status choices I have are Standard, Choice, and Theater. None of these make a difference. ...

...video game system? I have tried channeling down to find an A/V In channel and using the built in setup feature. If there is no input button on the tv itself to change the input then you will most ...

feature if I changed the device topography of my setup. is your tv has the a/v jack? if none you have to use the rf modulator. maybe needs remote I read the posts above and then tried it and it didn't

change from Video My living room television remote is missing and I need it to change the channel to local channels. Can I reset the television without the remote somehow? Also my television up stairs

change video input. I changed video input to video 2. Know it will not change back? When I try yo use menu control from front of tv the only thing that is highlighted is the audio adn english options.

...and the channels change with the simple 30 minute "reset" need to replace to tv tuner.its defective.or you buy some gudget like channel concoverter with remote..by using audio video rca

change from av to video mode If this is a CRT then you will not have a remote control feature for this. You will have to navigate using the buttons on the TV itself. Hit MENU and then use the volume +