Sharp Aquos LC-37GD6U 37 in. LCD HDTV "tv service mode seconds" Questions

Ad

Question about Sharp Aquos Televison & Video

1 Answer

...Tv and it powers on the screen is visible for a second and then it turns off. I tried holding the power button for 10 seconds, also tried putting it in service mode but no luck. Any suggestion's? ...

Ad

...service mode at all, it just flashes the Power LED all the time and not as a sequence. Your TV either has a failed backlight inverter or a bad CCFL Lamp !!! I've worked a few Sharps with this ...

Ad

Question about Sharp Aquos Televison & Video

2 Answers

...the Tv was resetted, go through the initiative Welcome startup screen. (Pick your Language, etc..) Means that the tv is in service mode. Call 877-332-7867 and they will walk you thru removing

Question about Sharp Aquos Televison & Video

1 Answer

...TV That blue K means you are in the service mode. Unplug your set and wait 30 seconds. Then at the same time you plug it back in, you need to be holding the volume down button and the input button. ...

...TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset ...

TV goes back into a coma, and the red light returns. When I was in service mode, I've tried scrolling through the 13 menus, and did an EPP reset menu 13. Still the same problem--unit worked fine until

Question about Sharp Aquos Televison & Video

7 Answers

...TV into safe mode (blinking power and opc lights). Try switching out the cable or cables before going the service route. I contacted Sharp support and told that Power light blinks green twice per ...

Question about Sharp Aquos Televison & Video

1 Answer

TV back on in service mode, to try to do a reset from the menu, upgrade the firmware, re-seat all ribbon cables of the main board and the middle logic board (Not sure what is that board call, it is in

Question about Sharp Aquos Televison & Video

11 Answers

service menu on the TV. As your local Sharp tech if he can do the same for you. DO NOT BUY ANY SHARP TV I used to have the same brightness problem. I have Bell Express Vu (Hi-Def) and would replay the

...tv back factory setting and should work again.Still have the problems,the main board it is shorted and dead require changing.The main board that board were the incoming broadcasting signal wire plug ...

Not finding what you are looking for?
Sharp Aquos LC-37GD6U 37 in. LCD HDTV Logo

331 questions posted

Ask a Question

Usually answered in minutes!

Top Sharp Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76060 Answers

Jaime Hernandez

Level 3 Expert

2337 Answers

Cindy Wells

Level 3 Expert

5909 Answers

Are you a Sharp Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...