Sharp Aquos LC-32GD4U 32 in. LCD HDTV "tv digital air" Questions

...digital signal Used the tv remote.Push the menu button.Now u are tv menu.Goto SETUP,go down to CH SETUP push enter on the tv remote.Pick AIR not Cable and push enter on the remote again.Now tv go in ...

...TV to analog mode. It is common for the digital tuning option to be greyed out in analog mode and only becomes available in digital mode. Look for a button on your Sharp remote labelled "DTV" or ...

...signal to the tuner. Jacob Yes,LCD tv have digital tuner inside.Just buy a digital antena.Plug it in the antena analog whole.Go to menu setup go down to ch.rescan should have all free air

TV needed a digital converter box this television did not pass the test. I thought it received digital signals and now I'm confused. Do I need another box on the last TV in the house that doesn't have

...set the input to "tv" "air". All digital anythings are grayed out and I cannot set it up - or 'reset' it to factory settings. Any suggestions? Do a channel search and select digital AND analog ...

digital conversion for LCD TV TV is a SHARP AQUOS LCD model LC-30HV4U with an Analog tuner for the air TV reception. Other than installing an external digital to analog converter box is it possible to

...tv cable or free air signal not getting from air antena,cables or dishes signals,or strong enough comming through.Get a better antena,like a digital antena,or a roof antena for better free air ...

...need anything. The only time a converter is required is if you use rabbit ears or an external antenna. In your case, the TV DOES have a digital tuner so you DO NOT need a converter in either case. ...

...tv? and do I need a specific input setting? antennas are not analog or digital, just VHF, UHF and they typically connect to a RF coaxial jack on the TVs rear panel. 75ohm silver round jack. Select in ...

tv to operate in digital mode. It is currently in analog. no one has been able to help me. Ok, 1. Press MENU to display menu screen, and press c/d to select "setup". 2. Press a/b to select " CH setup"