TV - remote doesnt work Hi! Just installed the Sharp Aquos 46" LE820. WHen it's plugged in and the Power button the on TV is pressed it turns on and requests a langauage selection ... the remote (with
Question about Sharp Aquos Televison & Video
...remote and tv (it's the same 'click' one hears when the tv power is normally turned on/off) This problems is very common on Sharp tv after a year or two.I have one too 46" Aquos.The tv Tuner signal ...
...Tv have Tuner signal board problems.Every times Power and OPC LED lights flashes.Just push the remote power button again and wait.Sometimes Power and OPC LED light will flashes require push power ...
Question about Sharp Aquos Televison & Video
...the batterys,fuse or anything. Can you help? If it starts flashing when you press the power button on the remote, the tv is getting the right signal from the remote. You have a problem inside the
Question about Sharp Aquos Televison & Video
...tv, not via the remote. Please advise. Thank you. User 'rapolley' is absolutely right. One can cycle through the functions to access different options, ie. 'TV', 'Audio', 'DVD', etc. I stumbled upon ...
day, then didn't Replaced Battery of remote.keep your mobile camera ON and press any from remote.If you get flash light in camera that means your remote is ok. Checked & Replaced LED TV sensor pcb
...remote again and wait the backlight will light up and tv will work again,some it will go back to Power and OPC LED lights flashes again,just push power switch again and wait,sometimes,u have to do ...
...TV unit (not in remote control) Note: If above didn't work, alternately use (VOL -) + (TV/AV input) buttons located on LCD TV unit (not in remote control) * While holding the above buttons, plug ...
remote, the TV light turns green and then immediately goes to a flashing red light. I have also tried using the master switch on the TV (a solution that has worked in the past) and it still comes back
Question about Sharp Aquos Televison & Video
...the TV still works fine and it's just the remote malfunctioning, try removing the batteries from the original remote and leave them out for 10-15 minutes. Put the batteries back in and try the
76 questions posted
Usually answered in minutes!
878 Questions
339 Questions
295 Questions
241 Questions
202 Questions