Sharp Aquos LC-37G4U 37 in. HD-Ready LCD Television "lcd coax input" Questions

...LCD model LC-30HV4U with an Analog tuner for the air TV reception. Other than installing an external digital to analog converter box is it possible to connect the digital antenna signal to the tuner. ...

...Input 4); swapped cables, still nothing Attempting to connect to Xfinity box; works with coax connector but with reduced image quality Does it work on other video inputs like the cable or auxiliary ...

...to broadcast error e201 check the input you are useing, that message comes up when there is no feed into the coax jack, if you are using a sat dish or cable box then change the input to match on the ...

...lcd hdtv. it is 'stuck' on analog. I have connected a digital antenna to the cable/antenna coax connection, set the input to "tv" "air". All digital anythings are grayed out and I cannot set it up - ...

on the television and pick the right input. It is recommended that you do not use the coax cable anyway unless you do not have a cable box. There is an input button on the television and on the remote

input one if you have the RC red, white and yellow hook up. or, just hook up the coax cable straight to the TV..Now, use the TV remote to operate the closed caption.  It will work like it should.

...the yellow video cable and the red and white audio cables. If the vcr does not have composite output then use a rf (coax cable) to antenna a input and put the tv on channel 3 or 4 as vcr is set

...cannot be tightend. the coax connection is soldered in place. if you use a cable box or vcr you could use composite input and get a better pict. use the vcr or cable box to bypass tvs ...

...coax (antenna in) jack. The tuners included are for NTSC (analog OTA) and CATV (analog cable). The front of the PC (VGA) and a S-video or composite (A/V) video input (called Input 4). Composite and ...

...coax connection, set the input to "TV", and set the TV to recieve signals over the air. When I go to setup, the "antenna setup- digital" selection is grayed out so I can't set it ...