Dyson DC25 Animal Bagless Upright Vacuum "cleaner head coming" Questions

Cleaner Head flopping down The cleaner head of the vacuum is"flopping" down and I cannot get the handle to go back in the correct upright position. It looks like something on the right side of the ...

...cleaner head keeps coming off when vacuuming Hi Michael,I'm sorry to hear about the issue you're having with your DC25. If the cleaner head won't stay attached to the machine in use, you ...

Miele S5981 vacuum cleaner electro/power head has stopped working. Orange light on head comes on. How do I fix this It is either a full bag/container. It is clogged or the belt has broken.

...cleaner. I even replaced the head. PLUS they want 150 dollars to fix. Come on, if this where Dyson is going, to create something that's going to cost 100's of dollars to fix, then DO NOT BUY DYSON! ...

...cleaner. It is too hard to push over the carpet If this has gradually got worse it will be the rollers on the brush head sole plate either warn away or come off so that then makes the brush head to ...

head is attached or the tool hose it turns on the vacuum cleaner. This may be out of allinement. To fix it remove both screws. You will see at the bottom of the another sliver rod with a circle at the

...what you need: Dyson DC25 DC29 Resetting the brush bar Official Dyson video This other video shows the head coming off and belt replacement: How to replace the dyson belt on Dyson DC25 vacuum ...

...Cleaner does not have suction. Air coming out of vent in top of head. Check the inlet down by the brush roll to see if it is clogged. Also check the belt to be sure it is ok. Is there suction at the ...

...Cleaner Head suction stops when head is attached; Multi Floor 2; UP19 This problem may have begun when I pushed down (too hard?) on the handle to switch vacuum from wand to floor - which caused a ...

My h2o mop will not allow any water flow the red light comes on after afrw minutes the green light comes on but there is no water or steam flowing out what can i do Try running a solution of 1 part ...