Westinghouse LTV-32w1 32 in. HD-Ready LCD Television "tv need warm" Questions

...warm up enough to do it's job. I can only assume that it will continue to get worse till it will not work anymore. What part or board should I buy? I'm pretty handy and I believe I can fix it with a ...

TV the picture will scramble seemingly after it warms up. Then I have to wait a couple days for it to work again just for the same cycle of scrambling to repeat itself. What part do I need to replace?

...will finally hold the signal. Be sure that your signal is strong enough coming through the HDMI or coax. If your signal is strong enough, it may actually be your TV's power supply needing to warm

...tv needs to get warmed up before it comes on but once its on it works fine The blue is an indication that there is a loss of video signal. Since the set appears to trecover after a "warm up" period, ...

tv seems like it need to warm up before it will accept HDMI signal? When I turn on my LG HD TV, it says "No Signal" from EITHER of my HDMI inputs. I wait a couple minutes, then turn the TV off, and on

TV needs to warm up before starts behaving properly. Have it disassembled, hoped to find visual failure. No luck. circuit board for power supply is 715T2276-4 and cannot obtain schematic yet. May need

the most problems when the tv need warm up are the power supply capacitors, you need disasembly the tv, tha bad cap are blow the top side o inflated. you need to be a electronic tech to remplace them

...need to turn the TV back off & then restart it to get both picture and sound. Sometimes you need to do this several times before the TV turns on, you hear a click, and then you get picture & ...

My Grunding LXW68-8510 26 TV does not switch on from standby - after several attempts through the remote, it will finally switch on. When the TV warms up, the problem is less acute. Thank you for your

...tv warms up is this a Power Issue to the main board or does the main boars need repair? Sounds like the fault is with its main board. Loose solder terminals or such. Contact any service technician. ...