...HF and LF BiWire.... the sky is the limit on cost here for what may not be a noticeable difference:) BiAmping in a different story where much more performance increase is achieved by using a separate ...
Question about Audio Players & Recorders
...HF- and LF+ and LF-. Can I use two amplifiers to drive these. Bi-wiring basically works wtih one amp. You need a crossover network and a signal doubler to use two amps (bi-amping). There are many ...
...HF and LF. I have one cable with two wires to connect to each. What goes where? The connectors on the speakers also have a small gold coloured plate on them. Should this be kept on or taken off? ...
...connections. A HF (which I assume is high frequency) and a LF (which is assume is low frequency) My receiver only has one CENTER OUT (black/red) How do I connect the unit for both low and high ...
LF) low frequency woofers. Understood. But WHICH green wire connects to the (+) positive terminal of this driver? The solid green wire or the green wire with the black stripe??? The white wires inside
Question about KEF Audio Audio Players & Recorders
LF and HF +/_ both be connected and if yes do they both go to speaker system A or separate to A and B on the amplifier. From the factory, those are equipped with "jumpers", one for red-red and one for
2 questions posted
Usually answered in minutes!
12 Questions
4 Questions
1 Questions
1 Questions
2 Questions