Roland Boss RC-2 Loop Station Stompbox Pedal "pedal battery" Questions

battery had drained on the pedal. I replaced it with a new one and the same thing happened. Even when I disconnected the pedal from everything else this problem occurred. Any help would be appreciated

...battery power. If problem persists, your pedal may be DOA do you own a multimeter.  a simple continuity check  between the ground of the battery snap ie the negative terminal and insert an ...

My pedal is brand new and cuts out after about ten minutes. I also bought the delay pedal and it cuts out around the same time while making a rapid pulsing sound. This sounds like you MIGHT be running

...pedal doesn't work. Checked the battery and the adapter. The light won't go on it will only light momentarily when I click through the modes. Any help would be appreciated. Greg Check all connections ...

...battery with the foot pedal and not a power supply. 1. Plug lead from guitar/instrument into INPUT side of pedal 2. Plug lead from OUTPUT side of pedal into amplifier INPUT. 3. Turn amplifier volume ...

...pedal to look at the battery it was very hot and it is still hot. What am i doing wrong? The battery is being shorted by something. It is impossible for me to guess what without looking at it. If the ...

pedal comes a terrible hum, i already change the cables, 9v battery and the ac adapter and the big noise continues, how could it be? Thank you WHY are you using a battery AND a 9 Volt adapter? This is

i have a used hartlke looper pedal [HL77] that worked for a week but now doesn't. i have a hartlke looper pedal [HL77]. i bought it off ebay (i know, i know). it worked well for a few days. now it ...

...expect maybe four hours on Duracell and Energizer, two hours on Radio Shack batteries. These pedals chew up batteries fast so best to get an adapter... and make sure it is the right one for

...Multi-FX FX600 Behringer" Effects pedal. -_- Most of these the battery is UNDER the pedal itself. You push in on the hinge pins with a pen to release and remove the pedal and change the