Coleman Propane Forced Air Heater w/Electronic Ignition (50,000-80,000 BTU) "wick" Questions

how do i change the wick? You need a pair of Pliers, a flat-tip screwdriver and a plastic bag (for old wick) ALSO - make sure the tank is empty (or as close as possible) 1. Turn the control knob to ...

the wick will not raise I just replaced the wick. When I turn the dial, the wick will not raise to the lighting position. It will turn when the assembly is out, but when I put the assembly in, the ...

adjust the wick on a dyno glo kerosene heater how do you adjust the wick Robin, without knowing which model Dyna-Glo, I can only generalize. But, if you are not getting an even burn with the wick ...

How do you replace the wick on a comfort glo kerosene heater? open the vent of wick, turn the knob clock wise to dismantle the wick from its fixing hole,after completion to out the wick,then try to ...

change the wick How do I change the wick You must be very careful and follow the instructions exactly on these wicks. The pins must be inserted into the holes on the wick holder. It is also easy to ...

change wick corona dkc22 i do not have a manuel. How can i replace wick from the beginning u need to start at top . remove cage from top. there should be a few screws on the side of the upper case ...

Have a Dyna-Glo. Took it apart to change the wick Have a Dyna-Glo. Took it apart to change the wick and clean. Got it back together, but the wick adjustment nob is stuck, can't raise wick. take the ...

wick trouble can the wick be adjusted, it does not burn very good anymore? yes, the wick is held onto the moving mantle with pointed pins protruding from mantle. remove the mantle assembly and remove ...

I need to change the wick on my dk 23 corona kerosene heater My kerosene heater won't light. I was told there is a wick that needs to be changed in it. i have found the wick online but I have no idea ...

dyna-glo kerosene heater (rmc-55-r7 ) The wick will not stay lit. Seems to be getting fuel. Also, where can I find a manuel wicks won't light for usually one of 2 reasons. water in the kerosene, which