Coleman Propane Forced Air Heater w/Electronic Ignition (50,000-80,000 BTU) "gas wall furnace work" Questions

...wall furnace that is only about 3 months old. I lit the pilot and everything was working fine for about a month and a half. Suddenly the furnace stopped working. Now the pilot light lights and stays ...

...gas cozy wall furnace. Main prob. is that thermostat can be heard to click on but the furnace does not respond. I have replace thermostat three or four times now, so I am not thinking it is the ...

...GAS WALL FURNACE MODEL # W501E Pretty much the only thing that will do that is the thermocouple not generating enough voltage for the valve to say it's OK. Usually you need to hold the button for ...

...furnace kicks on, runs a little while, kicks off, then kicks on again until desired temperature is reached it could be the thermostat on the wall not working or the fan control is not working as it ...

...Gas line Shut Off Valve.At 23 years old, you've gotten your money's worth out of this unit and it may be time to replace it. Empire makes several Direct Vent Wall Furnaces that are rated as High ...

...wall furnace won't stay lit after addional tank added. Heater worked fine all last season. Gas co. added tank yesterday and it won't stay lit ever since. Can't get tech support as it's T-day today. ...

...wall furnace, take a AA battery and attach one wire to each end, tape or use holder from toy at 99 cent store!! look at the pilot assembly, 2 wires(may look like one) go to the gas valve. at the gas ...

...furnace you will see a gas valve with a red button, or nob of some kind. Place the nob on pilot, then push in and light the gas coming out of the pilot don't let go of the button for at least 30 ...

...Wall Furnace has worked fine for 12 years. When I turned it on for a few minutes recently it stank to high heaven. I smells organic, like cat musk or something dead, perhaps. How could anything have ...

...gas wall furnace, model 3E473A that has a bad gas valve. I think the part number is 7000ARB for the gas valve. I could also use a new thermocouple but the one I have is still working so this is not a ...