Dell W3000 30 in. HD-Ready LCD Television "service hole back tv set" Questions

...back of my 22 inch VIZIO TV, so how do I attach a wall mount to it? Without any holes on the rear of the set it either has some sort of base mount or a specialized hanging mount. Best advise is ...

service technician.Don't take a risk, just give it in safe hands for repairing. I had this problem on my 42" Philips. Just got it yesterday and worked fine on the tv stand. As soon as I mounted the TV

...back of the TV. Any ideas? You should call for warranty service. If the set is very new try to get it exchanged. There are some very heavy duty power supplies and many high power matrix drivers used ...

...service manual or even a owners manual.Most of these sets you carefully lay the set on a padded surface face down and look at back-----should be four or more recessed holes with bolts that secure the ...

...service for this TV now that Syntax-Brillian has filed bankruptcy? Your best bet is to take the back off and look if there are and bulged capacitors on the power supply first, also look for cold ...

...the tv back plate against some board components which caused them to overheat (no air flow); or put pressure on internal connectors. I dont know. Hope this helps, may not apply to your

...back of the TV with a hair dryer for 5-7 mins after you have unplugged the TV. Look for the little areas of holes in the back panel of TV. Use these as your guide at where to use the hairdryer, but ...

...back open, of course. If this motion will make set to stay on, here you're! replace the board and a scan converters as well. those are plugged into the Y-sustainer to very left end of the set. 2 of ...

hole in the midlle of the screen, best buy wuold not exchange nor give money back, how can i fix it? You will need to call the manufacturer and find out who local to you is a authorized service center

...Service Tag #, I can look up it's warranty and support status. On switch may be fault. it must be checked and replaced if necesary. Have you tried using the remote at all. If the remote works, then ...