COLORS ARE SPLIT AND PICTURE HAS SHADOWS The STK730-130 Convergence IC needs replacement. You can get the IC at www.tvrepairworld.com plus assistance to show you where its located.
Need to kmow how to fix convergence Replace the single STK730-130 IC on the convergence power supply board.
The picture shows like its in 3D replace the single convergence IC which is a STK730-130 Integrated circuit. You can get one from www.tvrepairworld.com its listed under the Integrated Circuit catagory
...iam getting duplicate picture color is all out of whack seem like everything is to the left replace the convergence OC its a STK730-130 you need only one you can get one at ...
...the STK730-130 IC which is located on the Convergence power supply board. Replacing that may solve the issue. You can get the STK730-130 at www.tvrepairworld.com under the Integrated Circuit
...on a projection television? you will need to replace the signal IC STK730-130 for your model. You can get the STK730-130 from www.tvrepairworld.com its listed under the Integrated Circuits
color convergence out Convergence IC STK730-130 needs replacement. There is just the one single IC in your model. You can get thenew IC from www.tvrepairworld.com
Double and triple images and color convergence is out of adjustment Replace the STK730-130 IC your model uses only one of them. You can get the replacement at www.tvrepairworld.com
...off the picture is like looking at Three-D. It is shrunk in the middle and wide on the ends Replace the convergence IC you need one STK730-130 Convergence IC. You can get one at ...
I think it needs a convergence chip. What do I do? That model uses one IC its the STK730-130 you can get the replacement IC at www.tvrepairworld.com
76 questions posted
Usually answered in minutes!
2,410 Questions
1,124 Questions
809 Questions
789 Questions
510 Questions