RCA P52937 52" Rear Projection Television "unplug tv everytime turn" Questions

times, hesitate & blink again so many times. Count and report back but, I would recomend to unplug the TV's power cord, to reset the TV's system. Unplug for at least 3 minutes. I hope this was helpful

TV turned itself off and it keeps doing so everytime I turn it on My Mitsubishi wt46809 suddenly turned itself off and everytime I turn it on it almost immediately turns itself off. I unplugged it and

...tv, i have to unplug it from the wall. you will have to determine if tv fault or cable fault, shut down cable box and unplug it`s power cable. Once all power is removed from cable co. equipment retry ...

...the power button on the tv it sqeals for a second but wont turn on and you have to unplug it before it will let you try to turn it on I need the model number in order to assist you with the

...do it again, i have to do this process twice everytime I turn my TV on. unplug all inputs you have going to the tv then hook them back up one at a time testing each ones operation. cable box ...

everytime I push the power button. I can't get the TV to cut back on. Do you think the cell phone had anything to do with it? And what do you suggest I do to fix it? check the power supply sounds like

...TV, which has two large amp Ic's attached to it.. Unplug the +/- 20v line on the fron left corner of that board (red in color) and then try and power on the set... If the set comes on the board needs ...

...tv and it just automatically turn off, everytime since then i turn it on it goes off in seconds without picture or sound comes. sounds like a power supply problem, it is possible that somehow its ...

tv, and unplugging it from the wall outlet. It has worked almost everytime. What could be causing this? Remove solder from regulator output pins (on convergence pcb),clean and resolder.Practice visual

...tv unplug,replug the tv back about an hour later for the tv to do a resetting itself back to the factory setting.Than go into the tv Menu changes to all the manually setting and turn off all of the ...