RCA Scenium D40W20 40" Rear Projection HDTV "white bars left side tv" Questions

...WHITE SCREEN WITH YOUR BARE HANDS, IT IS COVERED WITH A POWDER AND CANNOT COME INTO CONTACT WITH ANY FLUIDS, INCLUDING THE OIL ON YOUR HANDS! There are four bars that hold the screens in, one on top, ...

white bar going verticaly on the left side. The rest of the screen is red and none of the functions are working. I cant change video feeds or get any of the menu to come up. Could this be some sort of

...white pix, and have this full size filling the entire screen. If the side bars are still there this means the CRT's are burned and this is a perminate thing, The fix would be to change the CRT's mabe ...

...black bars,pixelation,color distortion or white dots on screens. Here's a video that will help you find where the DMd chip is located : http://www.youtube.com/watch?v=0jr_9A5Xd2Q Have a blessed

...black bars,pixelation,color distortion or white dots on screens. Here's a video that will help you find where the DMd chip is located : http://www.youtube.com/watch?v=0jr_9A5Xd2Q Have a blessed

...left side shows a vertical bar on the edge of screen and is blurry. These sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the picture to look ...

White the TV is in the freeze mode, the on/off controller will not operate the TV. Every time on/off button is pushed, the timer signal displays on the left side of the manual on/off switch. Also when

...white vertical line on the right hand side of the screen. The picture is still displaying around these lines just not through them. I have turned everything off and back on, hit the system reset on ...

...bars seem to have a reddish hue. So, how do I fix convergence in just one part of the screen (I'm assuming it's something manual inside), and/or do I need to replace the convergence IC chips to get ...

white. CAREFULLY ....AND I MEAN CAREFULLY pull the left (as you are looking at board) ones up and disconnect from the center board. The ones on the right (I think they disconnect from the right board)