RCA HDLP50W151 50" Rear Projection HDTV "color wheel projector problems noise" Questions

...color wheel spinning. The color wheel often makes a low humming noise as it spins. Try checking to see if this is not the source of your noise. You need the color wheel to generate the colors needed ...

...color wheel in a sharp xr-30x dlp prokector. the picture on my screen has become very blotchy and it continually flickers. Reds become purple and blotchy as well as most other colors. Through some ...

...color wheel, fan how do i go about replacing this. This is a color wheel problem. I would recommend to use professional help because you can make more damage to the optical engine. Not to mention ...

...Color Wheel, Located behind the Lamp . You will need a Flash Light and Pull Lamp out ,Look inside and you will see Color Wheel. Color Wheel PN# BP96-00250A Price $82.66 Encompass Parts Distribution ...

color wheel, which I ordered and replaced after watching some pictures of how to do it. Guess what, the problem is still there. I though there were only 2 moving parts on a dlp, the fans and the color

...a fan would do? if so the problem is not the light engin but the color wheel that is defective 80$ and will not allow to power up the tv otherwise the light engine cost is close to 400$ in ...

color wheel I am just wondering is there anyway I could replace it on my own or do I need to take it to someone and get it fixed. I just recently had to get my lamp fixed in the tv, I didn't know that

...color wheel. In short DLP runs hot and if you have dust forget it! if you have ever sat in a presentation the projector is DLP. You can try to clean it out but there is not much you can do. I have a ...

...color wheel needs to turn on ( if you can hear a whinning noise then this is fine) next the tv will send a signal to the lamp ballast to turn on, and the ballast needs the 130v dc supply from the ...

...color wheel) 3] 30 seconds later tv would shut down with 3 flashing lights. After bypass the tv turned on as always and hasnt shut down yet. Always un plug tv first. Get the replacement part to avoid ...