RCA D52W20 52" Rear Projection HDTV-Ready Television "wire 3 plug white black" Questions

...3 or 4 times and that's it no sound no video. Everytime it flashes you can hear I guess the power supply kick on and back off. There was nothing wrong with the picture or sound before it went out. ...

...3 YEARS OLD. HELP?????? I have the same problem... It turns B&W I can still hear the sound... however I can still turn the tv off when that happens got mine working better unplugged the sound and ...

3 inches square with six controls(everything is black) One row of three will be marked FOCUS--stay away from those. The other row will be marked SCREEN. With a flashlight you will have to look closely

3 inches square with six controls(everything is black) One row of three will be marked FOCUS--stay away from those. The other row will be marked SCREEN. With a flashlight you will have to look closely

...plug them both back in and push power. it should come to life... remember not to touch random **** or you will get shocked to ****. MY vs. 60707 works fine now... (you might have to do this a couple ...

...3. The White cord is a white DVI connector, the one connecting to the input assembly is the one to take off. (where you plug in your components, S-Vid, etc.). 4. The Other cord (the ont that goes to ...

...3 prong female wire plugs into. It is 2 whites and 1 blue on it and is much shorter than the black/red/yellow wire that comes out of the fan. I do not see any slot for this WWBlue wire to plug into. ...

...3 from a combo DVD/VCR player. For example, the main screen on the Wii, which is normally a fairly bright off-white, is nearly black, but the outlines of the buttons are shown in dull, blurry red or ...

...3 and second in the other two zoom/wide zoom and third on the HD input with a HD signal coming in. There is also an option at this point to go into the Technical menu and fine adjust the convergence ...

...wire so that you can cover the solder point up after it is assembled. Now re-assemble the electrical chassis and route the switch/wires outside the chassis (I snipped a hole along the edge of the top ...