RCA D52W20 52" Rear Projection HDTV-Ready Television "r52wh74 convergence problems" Questions

...R52WH74 HDTV picture screen bows and displays red, blue & green wavy lines. Any ideas why? Do you have the convergence option in the customer setup menu? IF YOU DO NOT consult the tips and tricks ...

...problem. Need advice. RCA R52WH74 Check for voltages going to convergence power supply PCB on connector Bl600. If low or missing, check for bad solder on flyback and pico fuse # Fl231 for open. ...

R52WH74 its due to the faulty convergence. the stk convergence ic on the main board which controls the picture alignment is faulty and needs to be replaced to solve this problem.any tv technician will

...Convergence problem I have a RCA model no R52WH74 that looks like a 3D picture and I can see three colored lines at the top. I have been surfing and it sounds like a convergence issue but my ...

...R52WH74 has snowy picture and bad convergence and it turns itself off after a few seconds I still have the convergence option in the setup menu Thank you in advance for your advise Have you tried the ...

...CONVERGENCE PROBLEM I have the RCA model R52WH74 chassis ITC222A and i'm having the convergence problem with the 3D effect and picture bends in the middle. My question is to repair this problem do I ...

R52WH74 WONT CONVERGE RCA MODEL TV PICTURE LOOK 3-D AND COLORS ARE NOT ALIGNED TRIED AUTO CONVERGENCE AND IT WONT WORK ALSO TRIED RED AND BLUE STILL DONT WORK ANY CLUES?? first question is the picture

R52WH74. It hs a double view to it liek the colors has seperated. It also has a wavy red line across the top. It looks like the projector bulbs are out of line. All three bulbs are on and appear to be

...R52WH74 ,TRIPLE LINES , BLURY, COLOR OFF CURVED SOUND GOOD You can determine if you have a true convergence problem or just need an adjustment very easily. Take a look at this youtube video to find ...

...R52WH74 52'' Projection and the color on the set is in red,green,and yellow. Tried adjusting, however, does not help. Any clue? sounds like a convergence issue. IS the picture also pulled in from top ...