RCA D52W20 52" Rear Projection HDTV-Ready Television "prong back tv" Questions

...convergence. I tried different 3 prong connectors but it did not help. The DVI cable that came with the converter box is not compatible with the female plug in the back of the TV. Call RCA

...TV so they do not overlap. Overlapping cables can cause a slight hum. Replacing a flyback is not something I would suggest for anyone with no electronics experience. Second, lets see where the noise ...

the prong in the back of the tv that you plug the cable cord into is boken whats the model number of your set? please reply to this same post when replying.

...I resolve this problem so I can install the new ones? This is for my Sony Model KP65wv700 TV. They will need to be desoldered so you can install the New Ics and solder the new ones back into

...tv is model 60705. The power cord was accidentally pulled out and I've somewhat tried to mend it back together. Still no power. I've even taken the bare wires plugged into the outlet and laid them on ...

...2 large ICs on the left side of the board looking from the back. Thanks Reverse the AC plug from the set to the wall. Sometimes people will use a 3 prong adapter in which the hot/nuetral are

...back panel (or part where power cord plugs into TV & AGAIN inspect area around where power cord attached for, yeah, that's right, the dreaded black area around plug-in area. Maybe it's just a bent ...

...The prong configuration on back of this tv is for dvi only? Only get video from cable HD box with no sound? So I dont have an option to hear the tv without a receiver? You are right on all

...tv. any ideas? first if you have a can of air or air compressor blow out back if using an air compressor dont blow directly on stuff up close and dont let to much air out at once then if you have ...

...tv would turn on, then immediately turn back off, so I tried to put the original IC's back in, and I could only get one in because the prongs on one are bent, and now my tv turns on and stays on but ...