RCA D52W20 52" Rear Projection HDTV-Ready Television "manually change input tv" Questions

change inputs the word input is doubled up and distorted There were not much info in the manual but it did suggest trying this. 1st- Unplug for a few minutes and then plug it back in. Or use the reset

...tv powers on just fine and everything, but I can't seem to find out how to change the channel to the component or VGA inputs, when I push the device button the only options I get are Antenna (tv), ...

...change. Help... What is your TV input connection? Are you using Antenna? Cable? Dish? The Unusable Signal sounds like the TV is not getting a signal. Does your TV have a built in HD Tuner? If you are ...

...others, the colors change. almost like the blue input is not registing into the TV. Same problem w/ DVD input and Dish input so I think it is a TV issue. Replace both of your STKs 392-110s use

...change the video source to the one you have your Wii plugged into on your tv. Press the Menu button on your remote Press Enter or the Right Arrow button to access the Setup menu Use the up/down arrow ...

...change the video input on my kp-65wv600 There are a couple of ways to cycle through the inputs on the KP-65WV600. The front panel TV/Video button will cycle through the inputs. (This is near the ...

...of your tv ,or if universal remote has input try this,1.- connect hdmi ,2.- turn on device(dvd,ps3,blue ray, etc.) 3.- press input on remote ,or go to menu manually on tv and find input.hope it

Change the input mode one by one and then check. Please tell me how the TV is connected. Is it cable directly going or do you have any Settop Bix? Thanks select input source from remote or the buttons

...change? Secondly, I have a DVD player hooked up to my Olivia TV. How do I get it to play? Do I access a particular channel or what? No mention of how in the Olivia or DVD manuals. I have a Model 232T ...

...change in TV settings (like input type) and how. Not all DVI inputs are the same. Do you have the manual handy to see if it supports analog DVI? If it does, you should be able to just use A VGA cable ...