RCA D52W20 52" Rear Projection HDTV-Ready Television "change tv picture size without" Questions

TV started cutting off the top and bottom of the picture. I have tried all 4 picture size settings and also used Sports, Standard, etc settings. How can I get back to making my picture fit the screen?

change the picture size. And realize the restrictions as listed: ? In TV, VIDEO, S-VIDEO, and COMPONENT(480i, 480p) modes, all screen modes can be selected. (16:9 ➞ Zoom1 ➞ Zoom2 ➞

...tv WITHOUT remote How can you do it? I've been searching through these solutions, but they all use the remote, or just say "Go into the menu".. which is not helpful. I've been in the picture menu and ...

...picture settings in the menu select and the TV's remote gets no response whatsoever. Have you tried just clicking on your left or right arrow to change the screen size without using the menu

...tv for convergence problem. IC, STK392-110T OR First, take a look at the following web site information. Unfortunately, some RCA sets have manual convergence boards - which means you can do nothing ...

...TV, is this something that the service provider will do? hey voiolentce. if you press the # button on the cablebox remote control you can fine tune the zoom by those 20 pixels you want. you are most ...

...picture has a curvature to it. It is great in the smack middle but as it moves to the sides the colors seperate and looks like I am seeing in third dementions! Can you help me? People told me to ...

change a blown fuse without also replacing the amplifiers or you'll waste a fuse). It is essential to clean off the old heat-transfer grease from the heat sink surface and replace it. Apply a very

...TV is in the convergence.the two STK chip IC is there defected already and some associated resistor connecting the pins of that IC.if you change your is finish .look for a repairman to do works take ...

...Picture has lost its' snap always looks like it is a little washed out. There is a very light greenish halo around some images against a dark background. I though it might be dust on the lamps but ...