RCA D52W20 52" Rear Projection HDTV-Ready Television "3d view color" Questions

...shows colurs unable to picture quality is in 3D. shows colors unable to view clearly. its fading. it turns on . its seem like the picture is going bad. pi need convergece ic's & 6.8 ohm ...

...3d glasses 1)when picture isnt on but television is, it has 3 color lines on dark screen: blue, green & red that curve at top of screen going horizontal in a curve. 2) when picture is on, it is not ...

...color, used automatic settings...views terrible! tried setting again, personal, be damned if i can get them right! either too dark, light, or facial coloring, etc. looks silly. i'd appreciate all ...

...3d image. I am no longer available to switch to the panorama view. you have a loose connect on the convergrence board i would not recommend running till it gets fixed ...

Color has become distorted and as a result viewing is hard if 3d etc it is a convergence problem--a brand and model number are helpful to know here.

...view the screen the red color is misaligned counter clockwise and the blue is misaligned clockwise. This makes it difficult to read small writing around the outside of screen. Dull Video... Your set ...

...view it without the 3d our tv is a mitsubishi big screen television MO# ws 65907 All projection TV sets have two very common problems. One is convergence ( 3D/Warped video or dead set) the other is ...

...view as if it is in 3D. with blue,red, colors. top and bottom of the screen also curve into the center of the tv. worked perfectly fine night before. turned on this morning and starting doing the ...

view to it liek the colors has seperated. It also has a wavy red line across the top. It looks like the projector bulbs are out of line. All three bulbs are on and appear to be working. Any ideal what

...view. As well the picture has shifted to the right...... The "Hyper board" known as the tv convergenece board,it dead.Any colors lines R,G,B mis alingnment anywhere in the picture,have colors shadows ...