20 min . screen still distorted HELLO AM RICO, I WORK ON TVS SOMETIMES. ON THIS MODEL OF TV ITS COMMON FOR COLD SOLDER AROUND THE FLYBACK, CHECK THE FLYBACK, IF THERE IS COLD SOLDER AROUND THE FLYBACK
...20 TRANSISTORS TO DO THE SAME JOB. YOUR PROBLEM WILL BE CRACKED SOLDER ON THE FLYBACK TRANSFORMER AND ONE OF THE FUSES THAT LOOK LIKE LITTLE RED BOXES NEXT TO THE FLYBACK WILL BE BAD(OPEN). RESOLDER ...
...flyback 259296 at the following link and they provide free tech support to do the repair . Its a very easy repair takes about 20 minutes and requires the very basic soldering skills. heres the link. ...
cp 20 j 52 flyback no Google the model number with "flyback"
...20 TRIES, BUT NOW WILL NOT COME ON AT ALL. WHAT IS THE PROBLEM? Thats the error could for a bad flyback. You can get a replacement flyback at the following link with free tech support to take you ...
...The set disables the flyback. Stand-by blinks meaning that there is a fault condition.Be carefull with the high voltages. The flyback voltage is very high (20-30 Kilovolts !) and may be lethal
...20 sec it would turn itself off..prior to the problem the picture would blank out for a few seconds and comes back on.. Replace the flyback Its the 259296 Flyback available at www.tvrepairworld.com ...
...20 mins before shuting itself off. How can I fix this? Plus the picture is off on the left hand side like there are two images. This is most likely the flyback transformer going out and overheating ...
...20 and a T-10 screw driver to take the back off. The flyback with be on the left hand side of the set with a red wire coming off the top of it and the fuses will be located an inch or so to the right ...
20 hr tech with my first lap top 1 finger type If a 221 chassis (number on rear) the issue is a open part near the flyback--kits are available for this (protect part, diode and a cap).Also this set is
2,644 questions posted
Usually answered in minutes!
1,124 Questions
809 Questions
789 Questions
510 Questions
405 Questions
