RCA F27615 27" TV "audio volume trouble" Questions

...volume up or down, the humming sound also goes up or down, this means your amplifier is working, no hum means trouble in amplifier. summary: No hum: trouble in amplifier, speaker connection. Humming, ...

...volume is set at level one. Audio output is constant for volume level 1 to around 16. Muting is possible on setting the volume level to zero. Balance is also not working. Selecting only the right or ...

...volume. I can't hear any audio whatsoever. The picture is fine. The sound that you hear is coming from the sound detector not working or not receiving any audio. If the set is set to a second audio ...

audio going to the TV. Turn the volume down on the set first using the front panel controls or TV remote before checking, though. If the volume's all the way up on the TV you can get quite a surprise.

...volume down. You didn't give any information about what you have connected and whether the sound trouble is on all sources, so I can't tell you too much more. Make sure all your cables are properly ...

audio, such as: it's impossible to hear more. This fact happens in different time, you can not predict when it will happen again. The problem occurs every three or four days, or once a week, sometimes

...AUDIO MODE to anything but mono. Not every channel broadcasts in stereo sound. You can also try using the VOLUME UP or DOWN keys right on the front of the set to move the arrow from MONO to AUTO when ...

...volume is already in maximun. both audio amplifier IC are good. I think adjusment on service mode will solve the problem. I highly doubt that. You know for sure if the amp ICs are good how? You still ...

...audio ic. but before you come up with trouble shooting you must check first the volume button in the front panel which need to replace or clean the contact of the tact switch for volume.you can use a ...

...volume on my television keeps going down by itself. I have a picture on the screen but no sound Audio circuit is not getting supply voltage. Dry solder, weak capacitor could lead to this problem. ...