Question about Sanyo Televison & Video
...signal, but the living room Sanyo (tv 2) does not. So I did go back and remove the splitter just to try it direct (the old way) and still nothing on the Sanyo. Any ideas? checks should on your tv ...
Question about Televison & Video
...signal between TVs or other devices, try a direct connection to the one TV that isn't receiving the channel. Similarly, if you have an amplifier in the system, try using the antenna without it. (I ...
getthe higher channels what channels are you missing? what is the source for signal etc. If direct to cable and only get 2-13 for example either set is not in cable mode or the tuner in the set is bad
...signal but the Sony TV does not sense it, then perhaps the problem is internal to the TV. Primary suspect would be the tuner block/assy and/or its B+ supply. Often there would be two (2) voltages ...
signal.The sound stays on. It is getting worse. We have to turn the tv off for about 1/2 hour before it will work again. We have direct TV with Tivo. Please Help. I am not familar with that particular
...direct TV HD pack- will this work? This is not an HDTV. However, that does not mean you cannot use it to view the HD channels with DirecTV, you just wont be able to view them in hi-def. Use the ...
...signal and this can sometime follow the same numeric designations as was obtained from the Down Converter, So what you end up with is analog and digital signals having the 4-1, 4-2, 5-1, 5-2, ..... ...
...tuner entered--try pressing 03 or 04 on the remote to change tv channels. Otherwise, if you've got the VCR only connecting to Onkyo, and then the onkyo's MONITOR port (svid or rca yellow) connecting ...
36 questions posted
Usually answered in minutes!
2,410 Questions
1,124 Questions
809 Questions
789 Questions
510 Questions