RCA RT2360 System "wire clips home theater" Questions

speaker problem how do I remove the speaker wire from my surround speakers? is ther clips on the back of the speeker ?? if so push in on clip and remove wires.

...clips are not spring loaded, so you have to lift some type of clip, push wire in than lock the wire down. Can't see from the picture-is it Sony DAV system? If you're using too thick wire, that may ...

...wire to reach the receiver. I'm hesitant to cut the wires because of the clips on the end that attach to the receiver. Any reccomendations? If I do use speaker wire what gauge should I buy?? Use the ...

clips that go with the RCA RDT258 Home Theater system. They are used to mount the fron and rear speakers on top of each other--so you don't have to run speaker wire completely around the room. I can't

o go black to black red to red to the clips, if that speaker set has clips. -Check also the center wire for damage. --The amplifier's center channel has failed, or the plug has been damaged internally

home theater system but have no fm antenna for the radio If it uses a simple terminal clip (similar to a speaker connection) then extra speaker wire or lamp cord thats laying around works beautifully.

...Sensor (2) surround speaker wire clips for the back of the receiver(the clips clamp down on the wires to hold them inplace). how do i turn up the two rear surround speakers on my philips dfr ...

...home theater receiver and it says,"check sp wires",then it shuts off You have some speaker wires crossed or shorted. inspect the speaker wires for shorting (cat/dog /mouse chewed em up?). ...

wire ends that clips into the back of the receiver Normally the speakers and receiver just have a hole that lines up when you push on the head, and a spring pushing back makes contact on the bare wire

how to put speaker wire back into the clip to plug it in the receiver I need help putting wire back into clip that plugs in the back of receiver Press down the tab, insert the wire in hole above it ...