Samsung DLP HL-P5663W 56" TV "base screws" Questions

...but there should be 4 screws attaching the stand to the base of the TV chasssi but if you do remove it you will end up with a gap in the cover as Samsung do not provide blanking covers to cover it

How do you remove base for wall mount There is several screws located bottom middle, sometimes these have the letter S next to them.

...of sync . If you cannot see the picture or defocussing at the time of switch on , the problem is base

...base. Replace the top two and four bottom screws. Before you slide the player back throught the detents, aim the extended slide throught the slot in the front of the case and snap the smile back on. ...

base socket burns out, or when the pins are rusted or when the spark gap conducts to drain out the secondary anode voltage to the ground. It is better you call a service engineer. **WORKS** In my case

...the large fan to get to the color wheel assembly. Please help. there is a hiden screw down at the base of the fan assembly also lifting the fan cowl is very thight be sure to remove the ribbon wire ...

...the age of the tv. Please help before my husband ripps the cabinet apart!! Madam, in most cases the swivel mounts are fixed at the base of the TVs with a pair of Bolts / Screws and Nuts. Please

...screws holdingitto its base and tipped it slightly forward and he picture came back on, It now works with a small wedge holding in its slightly tipped location you probably have cold solder joints on ...

...screws are to short and will only fit the base of TV. There are four screw hole in the back of the TV, I am just wondering how do I what type of bolt and the exact size to get, should I just go to a ...