...tv down flat to work on it? I won't do that, because you can scratch your screen. If you have a the leg stand for your tv, I would put it back on and then work. Yes, plasma TV can be put face down to ...
Question about Samsung Televison & Video
TV face down on a blanket and remove the screws that hold the back on. Then unplug all the connectors from the board. Remove the screws that mount the board to the TV and replace the board. Put the TV
Question about Philips Televison & Video
...laying down (face up). We plugged it in today to test it and the green light doesn't come on (just the red). Any ideas as to what is wrong and if it is fixable? Storing it for a year should not have ...
...TV's typically do not have "bulbs," but rather backlighting. Plasma displays are especially touchy during movement. I would suggest checking your warranty status, as it's probably not something you ...
...TV Face down on a padded Table and removed all the screws. The tback just Pops off. 2. There is a protective cover over the circuit board. unscrew and pull off. 3. Unhook all of the wire attachments ...
Question about Televison & Video
...tv while it was laying down, especially if it was in storage. as well as several other factors that may have caused the lines. (temperature, humidity) get a quote from a local repair shop (i assume ...
Question about Toshiba Televison & Video
tv. lay it glass side down on a soft thick blanket to protect the glass. remove the rear panel. identify the board with the power connector. remove it. find replacements for the electrolytic caps, the
...down on a blanket, make sure to remove any objects on the blanket so it will not scratch up the screen. Most failure in the PLASMA TV are the power supply module, Z-sustain module, Y-sustain module. ...
Question about Seiki Televison & Video
...tv has a red vertical line threw the screen. How do I remove it? This usually happens when the screen gets wet and shorts out the electrodes on the bottom of the screen. You can try unplugging it and ...
...tv face down it's frame/screen to take off the back panel, or should it be standing and kept upright the entire time? If you need to to get at the interior of the unit to do your repair, put padding ...
76 questions posted
Usually answered in minutes!
1,031 Questions
445 Questions
373 Questions
357 Questions
327 Questions