Samsung PPM42S3 42 in. Plasma Television "standby mode upgrade" Questions

Ad

Question about Televison & Video

1 Answer

...Standby mode? If you mean the Standby Upgrade Mode, then MENU ' Network ' Network Settings ' Software Upgrade, then select the desired upgrade mode. Refer to the manual for full details: ...

Ad

Question about Samsung Televison & Video

1 Answer

...& off only seconds apart, so I can't even get a picture. Another site gave this advice. Press D.menu select SETUP icon select SYSTEM select SOFTWARE UPGRADE select STANDBY MODE UPGRADE select ...

Ad

...while its in this screen mode Noise in 5 volt standby voltage may have already corrupted eeprom. Change the two 680uf/16 volt and other bloated caps in power supply to see if tv is still

...standby mode. The standby ligt then just blinks 9 times with about a 3 second pause and then starts again. According to the manual the self -diagnosis is activated. Any ideas on how to get my TV ...

Question about Televison & Video

2 Answers

Standby Mode upgrade Change the setting to Off. I cant gteee that this will sort your problem out so post here if it doesnt & I will check samsung data base. http://dysonmanuals.llc.nu/ Chris.. Hiya I

Question about Samsung Televison & Video

2 Answers

...standby mode then displays the 2 blink fault. Could be a short in the power supply of any of the circuits. Three blinks - B+ over voltage protection (OVP), unit goes to the standby mode then displays ...

...standby mode the tv will turn on and then off in about 4-5 seconds just long enough for the screen to go grey then black againg. I'm not pressing the remote or even in the room when it happens. About ...

Question about Samsung Televison & Video

3 Answers

...standby mode... it does not have a standby mode !!! But what is happening is.. your tv is getting lamp errors. this can be caused by voltage drops and spikes while the tv is on... and a factory reset ...

Question about Samsung Televison & Video

1 Answer

...Upgrade- Standby Mode Upgrade. It is generally set frequently (mine was every 45mins) so I just changed it to 0:00 so it 'clicks' only once at midnight to do the software check. Hope this

...standby mode feature was the culprit. Switching this off from D MENU>SET-UP>SYSTEM>SOFTWARE UPGRADE did the trick. BTW my firmware version is T-TMDEUC-1003 This happened to me, i thought about taking ...

Not finding what you are looking for?
Samsung PPM42S3 42 in. Plasma Television Logo

56 questions posted

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...