Samsung HCN436W 43" Rear Projection Television "fault" Questions

my hitachi tv set only dispalys a blue print no images Sounds like T'Con board fault. If you wish to get some details; visit the site linked here. Pull up older posts. ...

...on after about ten minutes its powers it self off hi, well unfortunately your unit has developed, a fault, a component is heating up, and failing this is probably due to a bad power supply, and you ...

...is no picture (and no sound). What do I need to do? (Thank you!) SOUNDS LIKE CRT ,VIDEO DECODER FAULT. Check flyback on this issue, Crt fault would be a vague solution and deos not meet the ...

...black\r\nthe litte red lite blinks on the front panel the light indicates an internal electronic fault with your set projection TV`s have integrated protection circuits built into the circuit ...

...You need to switch off the power and remove the rear panel , check the alignement and look for faulty connectors on the main board.It is also possible that if the fault seems to increase ...

...check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ Line faults & possible causes to LCD & Plasma screen are given with illustrations. You can get

...is no power at all, then it is either the power cord or power board inside the TV. If after the fault the TV went in standby and does not wake up, then the TV has on protect mode after detecting

...original remote, and I get nothing, just a big 50 diameter black space. Sounds like display panel fault. Anyway, if you wish to get some details; visit the site linked here. Pull up older posts. ...

flashing stand by light and tv does not respond to any swithc or remote Hi. If after the fault the TV went in standby and does not wake up, staying there with led flashing, then the TV has on protect ...

...longer to start but now won't start at all can i repair myself? i think it might be a relay?? The fault is not a relay, the clicking sound is just the protection circuit that prevents the TV from ...