Samsung HCM422W 42" Rear Projection Television "projecter screen blurry middle" Questions

Blurry screen on 50in Hitachi LCD I have a 50 in Hitachi rear projection LCD. The set is 5 years old. The screen has 2 eliptical shaped areas side by side in the middle of the screen that appear ...

screen are a little blurry & you can see slight color bars in the blurriness. Middle of the screen is fine. Any ideas? Thanks. Probably bad convergence chips, or chip, if this is a "one chip" set,

...blurry. any suggestions on fixing it that i can do. i would appreciate any help that you can give there is a focus control in the front of the set behind the front grill there is a door in the middle ...

blurry on sides. Please help. On the middle circuit board towards rear is a metal wavy plate.On the back side(actually towards screen when looking from rear of unit),the middle screw has a ground wire

...blurry, i can see blue green and a lil red offset from eachother at the top and bottom of the screen... its very noticeable on widescreen movies... i can actually see a green bend on top and bottom. ...

...blurry and you can't make out what is on the screen. Sometimes it will go back to normal by itself or if I hit the top of the tv towards the middle, the picture goes back to normal. After the tv has ...

...blurry on on both sides and clear in the middle, don't know much about the projection tv inside because I have never worked on one but pretty handy any easy solutions? When i switch to video 1 or ...

...screen is clear in the middle and blurry on sides and color is off on sides also?? You are going to have to Realine the Convergence and set Focus to each Tube on the Screen/Focus block Control.Their ...

screen is blurry and bowed in the middle. Screen is normal size out on the ends then gets narrow towards the middle. The model # is hcm4216w. We had disscussed it and you said I should change the ic's

...screen to be blurry. 1. removed back, cleaned out moths & other bugs from camera's. 2. placed paper plates over each camera and removed them one @ a time. narrowing was never affected. All camera's ...