Samsung DLP HL-P4663W 46" Rear Projection HDTV-Ready Television "know ballast bad" Questions

...ballast without knowing it is bad for sure)? The transformer can't damage the new lamp. Faulty transformers normaly take out the driving transistors or the fusible link in the power supply, if these ...

...know the exact please post) CAUTION DO NOT TEST THE POWER GOING FROM BALLAST TO THE LAMP ITSELF (the ignition charge is too much ~15kV) I assume you tried a new original Philips lamp and that you ...

...know that the speakers work, as I've tested them. On another post, the solution was something like the MICOM doesn't work. Any suggestions? And...I have no idea what a MICOM is. HLP, HCN HL-S The ...

know about the lamp or balast thig just want to see if there is a way to test the ballast before i buy a lamp. im verry handy with a volt meter Sure, you can test by Use the screwdriver and remove the

...know how much voltage the ballast should be putting out to the bulb. my multimeter is only showing a little over 13 volts. Also, is the small pigtail wire going to the ballast a switch that turns it ...

...know it is broken? What should I expect to pay for a new lamp? Do you have any reccomendations for where to purchase? Thank you, Lisa If it not the lamp.. is the ballast easy to replace too? I have a ...

...know what the problem is? slusher17, You most likely have a bad lamp ballast or possibly a bad power supply. When the lamps fail they can draw quite a bit of current and damage the ballast. High ...

...know it is the lamp that is not working or the ballast may need to be replaced. If that is not the problem next check to see if the color wheel is spinning or broken. If broken, it will need to be ...

...ballast i could sell you at a lesser price then anyone out there. If you get it out, Let me know and we can go from there. Do you hear it trying to fire the lamp? I would listen for that first and if ...