tv. Picture is real dark it is most likely set to movie setting and energy saving mode. go to the menu with the remote and take it off of power saving mode then set your picture to medium warm setting
...TV must be in standby mode (Power off). 2. Press the following buttons on the Remote commander within a second of each other: DISPLAY ==> Channel 5 ==> Volume + ==> POWER. The first service ...
after maybe 1 hour tv shutts off Check your power saving mode or safe mode.
...the same issue. switch of computer. Pull out the plug , wait one minute and switc everything on again An alternative is to just power off TV and unplug DVI cord and Power on TV and plug in DVI
...TV is going into "Power Save" mode. It is not detecting any signal on the input it is set for. When you first power it on, make sure there is a signal to the input that you have selected. This ...
TV Powers off The GE HDTV model D40GW10 randomly powers off? Any ideas why sometimes they go into "power saving mode" you should be able to dissable this in the settings hope this hepls regards
...TV powered off press: [mute], [1], [8], [2], [power] Television will power up in service mode and GAMMA GAIN1 will be displayed on the screen. Use [mute] and the [menu] button to move values up and ...
...TV with the power switch on the front of the TV itself then back on with the same switch, the setting will be saved in memory. I have to do this with my TV every time the power goes out in my ...
...doesnt say anything about the tv turning off. ya make sure no power saving mode on if u just gotthis new take it back get sharp or samsung those dont have great revews ok or pisture like samsung ...
...power the TV off I loose the convergence and have to redo it every time I turn the TV back on. On another note when I try the auto focus feature it displays a message "Check Factory Settings". Any ...
278 questions posted
Usually answered in minutes!
1,031 Questions
445 Questions
373 Questions
357 Questions
327 Questions