Samsung HLN617W 61" Rear Projection HDTV "cause shadow tv screen flashes" Questions

...cause the shadow? 2. Do you think the ballast is going out also? 3. What can be causing the flashing? Will replacing the color wheel solve all of these issues? Replace the color wheel and you should ...

...shadow on images toward the right and left side of the screen. I took it apart again and found resistors 3153 and 54 bad so I replaced them and for 1 day the tv worked before going out again. What ...

...Screen is bowed or warped. TV shuts off after powering on. Power light will blink. TV may also make a chirping noise. Here are some photos of convergence problems. Here is a quick test.... Using your ...

...shadow. Flash focus does nothing. Your TV most likely has one or more possible problems. Problem #1: Convergence Chip Failure ( common problem ) Here are some of the most common symptoms and example ...

...cause the screen to look dull, red/orange, etc. You may even see halos around images. Picture of a set that needs the fluid changed. TV set after fluid change Solution #2 What you will need to do is ...

...shadow. I tried the flash focus and the problem still persists any ideas on where to go from here? When you first turn it on,Count the flashes on the standby/power button. Continuous blink once a ...

...shadow mast inside the tube may have shifted and the color will be off. You can't tell until the set powers on and you get a picture. This is unrepairable.Good Luck!! Please rate this solution! ...

...shadow on all images. Almost watching TV in 3D without the 3D glasses. What is it ?? If you try to adjust convergence with the flash focus, perfect focus, (depending on the make of your set) or by ...

...shadow behind the normail image on the TV , like an inch behind it... If your colors are not lining up on the picture try to use the customer convergence menu to line up all of the colors. If you try ...

...shadow) areas of the picture and then back off until it **just** disappears. Increase the contrast until the desired intensity of highlights is obtained. Since brightness and contrast are not always ...