Samsung HLP5085W 50" Rear Projection HDTV-Ready Television "remove inch tv" Questions

...inch (?) tv powers up.sometimes the lamp will light for about 15 seconds then shut off. more often the lamp wont light. in both instances the "lamp"indicator light on the front blinks. if the lamp ...

...about two inches thick on the far left end of the T.V Sounds like the color wheel has broken. Remove the color wheel and see if its broken. Usually a broken wheel will cause those

...inch asking to check factory data As ima_rm2000 noted, the HLN is manual focus. There is a focus ring at the base of the lens assembly. Here is PDF of the focus assembly. You have to remove the back ...

inch Samsung DLP tv. Browsed youtubeand found 3 suggestions...tried all 3 together, don't know which one (s) worked: 1. After UNPLUGGING power cord and removing lower back panel and carefully removing

...tv, i changed the lamp which helped some but screen has blurry look to it , won't get sharp picture, whenever there is a night scene it gets almost too dark to see You should clean your optic lens. ...

...TV. Remove the screws on the lamp assembly and slide it out of the TV. Disconnect the old lamp and insert a new lamp into the assembly. Slide the assembly back into place and replace the screws. Do ...

...TV. Turn the Samsung around so that the back is facing you. Make sure the Samsung is unplugged from the AC socket. 2 Use the Phillips screwdriver to remove all of the screws from the back panel. Put ...

...TV. Turn the Samsung around so that the back is facing you. Make sure the Samsung is unplugged from the AC socket. 2 Use the Phillips screwdriver to remove all of the screws from the back panel. Put ...

...TV. Remove the screws on the lamp assembly and slide it out of the TV. Disconnect the old lamp and insert a new lamp into the assembly. Slide the assembly back into place and replace the screws. Do ...

...TV. Remove the screws on the lamp assembly and slide it out of the TV. Disconnect the old lamp and insert a new lamp into the assembly. Slide the assembly back into place and replace the screws. Do ...