Samsung HLR5067WX 50" Rear Projection HDTV "glass sliding down television" Questions

DOWN- HUMMING NOISE NO VOLUME MY TV JUST STARTED ACTING UP IT WILL WORK SOMETIMES AND OTHER TIMES IT FEELS THE URGE TO NOT WORK.. IT TURNS ON AND MAKES THE BEEP NOISE WHEN I TURN IT ON.. THEN IT MAKES

glass the other is vertical lines. If you must remove these from the frame,then as you remove the screen frame from the TV lay it face down and then remove the screws from the inside of the frame, Pay

...glass square in front of the color wheel and wiped that down too. I put everything back together, and now the picture is perfect. Things to remember are: *Keep track of the screws and where they ...

down to your liking. The lower the brightness the long the lamp will last.Check and clean the air filters on a monthly basis. Having a clean air filters means that your lamp has better airflow. Air is

...glass tube you will fine two metal tabs. By sliding the metal tabs (they move in a circular pattern) you can re-center the crt with a little experimentation. Then follow the convergence procedure to ...

...down. There is usually a strip of black tape that seals the two pieces of thin, glass sheets. This allows for easier installation and keeps debris from getting between screen and lens, however, ...

glass) thoroughly and carefully (using only plastic/rubber non-metallic vacuum attachments) vacuumed fans and all cavities- also used long, narrow feather duster for narrow spaces and fanblades. There

...down; note which are which and set them aside. Using gloves pull the entire metal box (it is called a light box) out of the set; there are hand holds on either side?careful as the metal has sharp ...

...down; note which are which and set them aside. Using gloves pull the entire metal box (it is called a light box) out of the set; there are hand holds on either side?careful as the metal has sharp ...