Samsung HLP4663W 46" Rear Projection HDTV "check fan number 1" Questions

...CHECK FAN # 1") is displayed Samsung HL-S5087W (" CHECK FAN # 1") is displayed on the screen. After removing he back I can only see ONE fan !! It's right in the middle , in the rear of the ...

CHECK FAN #1, WHICH FAN IS THIS HOW DO I DO IT Hello, I believe the Fan #1 on Samsungs is usually either the Fan that directly cools the lamp or the exhaust fan right next to it. But as a tech I would

...fan 2, but check fan 2 message still flashes on screen. is there a reset procedure or is there still a problem. You still a problem. If you have visually verified that the fans are functioning with ...

...number and link for a replacement if the picture freezes with the audio still working. If the picture just drops off the color that would be your color wheel.Let me know if I can assist you further. ...

...check fan no.1" Your DMD board fan is bad. Once you have the back cover off, it will right in the middle of TV. It is a small fan, about 2 inches in diameter. It is held in place by 2 screws. If you ...

...Check the thermal sensor fuse part# 1-910-023-93 or possibly one of the four fans. If the unit goes into Fan/Thermal Protect shutdown (4 blinks) it can be difficult to determine the cause since the ...

...Check the Lamp Fan it could be defective . If the Lamp Fan stops running set will shut off to protect the Lamp other wise Lamp will burn up if Fan is Not running.If the Lamp Fan is OK then it will be ...

The fan seems to be working. Any suggestions? Thanks! I can feel your power supply is going to get short!!!1 check it .. and check it on another device a dvd or satellite maybe your tv is not guilty!

...fan but afraid to install it and burn out a third bulb - there might be something else wrong. Any ideas? I would suspect the ballast that powers the lamp may be bad.It would be a good idea at this ...

...number see what they list in parts /prices They might have free service Manual you can print out online. 1-800-638-3328 wait untill you get ballast board ,before making any desision about more parts ...