Samsung HLN5065W 50" Rear Projection HDTV-Ready Television "dlp lamp failure" Questions

...set was on.The only other common failure is the Ballast which powers and drives the lamp----At the moment of turn on if the lamp lights briefly and goes out the Ballast is less likely to be

...DLP Lamp died, new lamp will not light` while unit was powered up and working, picture turned to black and white, froze - then went all black with snow band on the bottom. After short while powered ...

...lamp I have a Samsung DLP HLR5667W 56 in Rear Projection HDTV for about 4 years and I replaced the lamp last week. After I replaced it, there's about an inch-wide shadowy column appeared on the left ...

...DLP sets) will try 3 times to get the lamp lit before the microprocessor will give up and then the 3 lites on the front will blink indicating a LAMP failure. This process takes about 1 to 2 minutes. ...

...dlp. It wont turn on, lamp wont fire up. I read a few things online and bought a new lamp and ballast, and still nothing. Made sure to buy the same that was in my tv(phillips). I hit the power button ...

...DLP TV 3 lights blinking Lamp light flashed then tv restarts a few times then all 3 lights flash. No picture or sound. I replaced the lamp with no success, then the ballast today. I stuck a voltmeter ...

...lamp is the problem. Also, look for blackening or obvious failure in the filament to confirm it. As has been said, the lamp has a finite amount of run-time before it fails. Think of it as a feature ...

...lamp light - nothng else Hi, The color wheel in my Samsung 56? DLP crashed a few months ago. Yesterday I finally got the replacement and installed it, following pictorial instructions I luckily found ...

...DLP rear-projection TV has had a very dim picture for months. We have replaced the lamp once already. How long ago was lamp replaced, also you can try cleaning dust off the lamp. Dust builds up on it ...